Vertical sliding door suitable cold rooms having negative temperatures up to -45°C, equipped with anti-fall safety systems.
For negative temperatures up to -45°C
Blade thickness available: 120 and 150mm
Polyurethane density 45 Kg/m³
Applications
Suitable for cold rooms used for the preservation of foods at a temperature from -5° and up to –45°C.
The vertical sliding doors are mainly used in: plants for the meat processing, cheese factories, deposits for the preservation of fruit and vegetables, slaughters, ice cream industry. where isn't possible to install sliding door.
Blade
Blade edge in anodized aluminium (thickness 120mm or 150mm) with PVC profile for second gasket;
Blade covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10 mm;
Outside handle: fixed;
Inside handle: "plastic deep-set"N°2 EPDM double density gaskets on 3 sides;
Lower gasket in PVC.
Frame System
Frontal frame (138mm) with side frame in PVC colour RAL 9010; the frame is thermo-welded (45°) up , beyond such thickness it’s assembled (90°) with joints;
Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);
Threshold the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable.
Heating cable ~30W/m powered at 220V and put inside the frame.
Sliding System
Motion is conveyed by 2 chains. They are positioned on the right and on the left corners in order to correctly lift the door;
The door is well-balanced by one only counterweight. This is to let the mounting be easier and to reduce the side dimensions;
The aluminium guide has been especially conceired for such a door and it meets all the safety, sturdiness and easy istallaton requirements;
The limit stop grants a perferct baskets crushing;
The plastic roller grants a linear motion and reduces the noise.
Security
The use of 2 cables connected at the same counterweight produces a safety redudancy. This is because whether one cable is cut, the other is able to support the door.
In case both the cables are cut, a special falling prevention safety device doesn’t allow the door to be closed.
Standard dimensions one blade version.
Up to 3000x3500mm
When both sides have a dimension bigger than 2500 mm, the blade is divided, horizontally, in two parts (the lower part is realized with H=1250mm while the upper part is given by the difference) and the frame is supplied dismounted.
Vertical sliding door suitable cold rooms having negative temperatures up to -45°C, equipped with anti-fall safety systems.
For negative temperatures up to -45°C
Blade thickness available: 120 and 150mm
Polyurethane density 45 Kg/m³
Applications
Suitable for cold rooms used for the preservation of foods at a temperature from -5° and up to –45°C.
The vertical sliding doors are mainly used in: plants for the meat processing, cheese factories, deposits for the preservation of fruit and vegetables, slaughters, ice cream industry. where isn't possible to install sliding door.
Blade
Blade edge in anodized aluminium (thickness 120mm or 150mm) with PVC profile for second gasket;
Blade covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10 mm;
Outside handle: fixed;
Inside handle: "plastic deep-set"N°2 EPDM double density gaskets on 3 sides;
Lower gasket in PVC.
Frame System
Frontal frame (138mm) with side frame in PVC colour RAL 9010; the frame is thermo-welded (45°) up , beyond such thickness it’s assembled (90°) with joints;
Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);
Threshold the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable.
Heating cable ~30W/m powered at 220V and put inside the frame.
Sliding System
Motion is conveyed by 2 chains. They are positioned on the right and on the left corners in order to correctly lift the door;
The door is well-balanced by one only counterweight. This is to let the mounting be easier and to reduce the side dimensions;
The aluminium guide has been especially conceired for such a door and it meets all the safety, sturdiness and easy istallaton requirements;
The limit stop grants a perferct baskets crushing;
The plastic roller grants a linear motion and reduces the noise.
Security
The use of 2 cables connected at the same counterweight produces a safety redudancy. This is because whether one cable is cut, the other is able to support the door.
In case both the cables are cut, a special falling prevention safety device doesn’t allow the door to be closed.
Standard dimensions one blade version.
Up to 3000x3500mm
When both sides have a dimension bigger than 2500 mm, the blade is divided, horizontally, in two parts (the lower part is realized with H=1250mm while the upper part is given by the difference) and the frame is supplied dismounted.
